Ironman 4×4 Atlas Platform Racks
The Ironman 4×4 Atlas Platform Racks are expertly constructed with extruded aluminium beams secured within an extruded aluminium perimeter. Designed with beams running perpendicular to the vehicle, this setup facilitates easier loading and securing of cargo, significantly reducing the risk of longer items dropping and damaging your roof.
These platform racks are perfect for carrying a diverse range of accessories and loads, including gas bottles, jerry cans, swags, soft luggage, spare tyres, and chainsaws. Available in three different lengths and widths across a total of six variations, the Atlas Platform Racks ensure an application that suits your specific needs.
Capacity & Weight
The full specifications can be found in our detailed ‘Specs Table’ below. The key takeaway is that these platforms are stronger than any vehicle’s load limit, including fibreglass or ABS canopies. For steel canopies, expect to hold at least 100kg dynamically.
The weight of a complete platform kit, including all mounting hardware, ranges from 24kg to 39kg. It is essential to subtract these weights from your vehicle’s total roof load limit as outlined by the manufacturer!
No Off-Road Asterisks
Unlike some manufacturers, the Ironman 4×4 Atlas has a singular rating that applies whether you’re on blacktop, corrugated dirt roads, sand, or rocky tracks.
Blade System
Atlas platform racks are secured to most vehicles via a reinforced stainless-steel blade and can be affixed to an Ironman 4×4 canopy using a pedestal mount.
Noise Management
While roof racks will undoubtedly add some noise to your vehicle, the Atlas system has been tested and designed to minimize this as much as possible. A small, unobtrusive wind deflector is located under the front leading beam, and soft rubber inserts in the front and rear T-slots help further reduce wind noise. Additionally, the rack can be adjusted forward and backward by up to 20mm once installed to find the optimal position.
Solutions to Suit Your 4WD
To accommodate Dual Cab vehicles, we offer platform options suitable for cabins, canopies, and Slide-Away Electric Tonneau Covers. Please note that a single platform should never span a canopy and cabin due to articulation and movement during transit and off-roading.
Check out the listing below for the best platform sizes tailored to each application:
Cabin
- Platform A: 1240mm x 1530mm
- Platform B: 1380mm x 1530mm
- Platform K: 1240mm x 1390mm
Canopy
- Platform A: 1240mm x 1530mm
- Platform B: 1380mm x 1530mm
- Platform K: 1240mm x 1390mm
- Platform S (Custom Canopies): 1485mm x 1390mm
Slide-Away
- Platform S: 1485mm x 1390mm
Ironman 4×4 Atlas Platform Racks
The Ironman 4×4 Atlas Platform Racks are expertly constructed with extruded aluminium beams secured within an extruded aluminium perimeter. Designed with beams running perpendicular to the vehicle, this setup facilitates easier loading and securing of cargo, significantly reducing the risk of longer items dropping and damaging your roof.
These platform racks are perfect for carrying a diverse range of accessories and loads, including gas bottles, jerry cans, swags, soft luggage, spare tyres, and chainsaws. Available in three different lengths and widths across a total of six variations, the Atlas Platform Racks ensure an application that suits your specific needs.
Capacity & Weight
The full specifications can be found in our detailed ‘Specs Table’ below. The key takeaway is that these platforms are stronger than any vehicle's load limit, including fibreglass or ABS canopies. For steel canopies, expect to hold at least 100kg dynamically.
The weight of a complete platform kit, including all mounting hardware, ranges from 24kg to 39kg. It is essential to subtract these weights from your vehicle’s total roof load limit as outlined by the manufacturer!
No Off-Road Asterisks
Unlike some manufacturers, the Ironman 4×4 Atlas has a singular rating that applies whether you're on blacktop, corrugated dirt roads, sand, or rocky tracks.
Blade System
Atlas platform racks are secured to most vehicles via a reinforced stainless-steel blade and can be affixed to an Ironman 4×4 canopy using a pedestal mount.
Noise Management
While roof racks will undoubtedly add some noise to your vehicle, the Atlas system has been tested and designed to minimize this as much as possible. A small, unobtrusive wind deflector is located under the front leading beam, and soft rubber inserts in the front and rear T-slots help further reduce wind noise. Additionally, the rack can be adjusted forward and backward by up to 20mm once installed to find the optimal position.
Solutions to Suit Your 4WD
To accommodate Dual Cab vehicles, we offer platform options suitable for cabins, canopies, and Slide-Away Electric Tonneau Covers. Please note that a single platform should never span a canopy and cabin due to articulation and movement during transit and off-roading.
Check out the listing below for the best platform sizes tailored to each application:
Cabin
- Platform A: 1240mm x 1530mm
- Platform B: 1380mm x 1530mm
- Platform K: 1240mm x 1390mm
Canopy
- Platform A: 1240mm x 1530mm
- Platform B: 1380mm x 1530mm
- Platform K: 1240mm x 1390mm
- Platform S (Custom Canopies): 1485mm x 1390mm
Slide-Away
- Platform S: 1485mm x 1390mm
